How To Use LifeTime® Wood Treatment Non-Toxic Wood Stain
Easy to use
LifeTime® Wood Treatment non-toxic wood stain is purchased as a powder concentrate in 4.5 litre/1 imp gallon and 22 litre/5 imp gallon packages. Just mix the powdered stain with water. Apply to bare, untreated or pressure treated wood using normal application methods – brush, roller, dipping or spraying. Wood can be handled while wet without leaving marks on the wood making it a convenient application process during a construction project. The weathering process helps penetration and can be accelerated by wetting and drying the wood.
Easy to clean-up
LifeTime® Wood Treatment non-toxic wood stain cleans up simply with soap and water.
Shelf life
In its concentrated, dry form LifeTime® will store indefinitely. After mixing with water, the solution will keep in a sealed plastic container in a cool space out of direct sunlight. The water in the solution will eventually become stagnant unless distilled water is used in the mixing process. This stagnation will not inhibit the efficacy of LifeTime®. If you mix only what you need, you minimize the possibility of having large amounts of LifeTime® solution left over.
Sealers or colored stains
Sealers are not necessary and not recommended. LifeTime® Wood Treatment non-toxic wood stain does not seal wood but instead allows the wood to breathe and age naturally. Coloured wood stains can be applied over LifeTime® but most commercial stains do not offer the weathering feature that is integral in the LifeTime® process. Water based pigments can be successfully added to LifeTime® and in the future Valhalla Wood Preservatives Ltd. will offer a range of tints that are compatible with LifeTime® Wood Treatment non-toxic wood stain.
Testimonials
"30 minutes after applying LifeTime® the fresh end cuts looked exactly like the rest of the old logs. ..." |
LifeTime® Wood Treatment
Can Be Found at: